This site needs a newer browser: Safari 16.4, Chrome 111, Edge 111 or Firefox 128 and up. Please update your browser or open the site in another one.

How to Read an Australian Form Guide

Track ratings from Firm 1 to Heavy 10, benchmark races, barriers, apprentice claims and the stat lines: an Australian form guide, read line by line.

Australian form guides follow a pattern you can learn once and use everywhere, from a Tuesday at Dubbo to Melbourne Cup day: the track rating and rail in the header, then for each runner a form string, a barrier, a weight in kilos, a jockey and any claim, and a block of stat lines. Australia also races more often over sprint trips than anywhere else we measure, which changes what you look for first.

This guide goes through the card in the order you would read a race. For what the numbers say about betting Australian racing, the sprints, the front-runners and the sharp favourite market, see Australian racing form: betting the sprint capital.

The race header

Distance. In metres. More than half of Australian races, about 53.5%, are sprints, and only about one in ten is run over 1,800 m or more.

Track rating. Since 1 December 2014, every Australian turf track has been rated on one scale from 1 to 10, grouped as Firm, Good, Soft and Heavy. The old words "fast", "dead" and "slow" went at the same time, so you will still meet them in older form.

RatingWhat it means
Firm 1A dry, hard track
Firm 2Firm, with reasonable grass cover
Good 3Good grass cover and some cushion
Good 4Some give in it
Soft 5A reasonable amount of give
Soft 6Moist, but not badly affected
Soft 7Rain-affected; it will chop out
Heavy 8Rain-affected; horses will get into it
Heavy 9Wet and getting squelchy
Heavy 10Very wet, close to saturated

A Good 4 is a good track with some give in it, one step firmer than a Soft 5. The rating can change during a meeting as rain falls or the track dries out, so check it again before the race you are betting.

Rail. The rail is moved out in metres from its innermost line to spread the wear on the track, and the position for the day is announced before racing. A rail move can change which part of the track is fresh.

Class. The race type tells you who is allowed to run:

The difference between a class race and a benchmark race is in how they sort the field: a class race limits who can enter by the number of wins, while a benchmark race sets each horse's weight from its rating.

The runner line and the form symbols

Every symbol on the card, with the British and Hong Kong codes beside them, is in horse racing abbreviations and form symbols.

The stat lines

Most Australian guides print a career record and a row of stat lines in the form starts:wins-seconds-thirds. A career line of 18:4-3-2 means 18 starts, 4 wins, 3 seconds and 2 thirds. The same format follows for the track, the distance, the track and distance together, each track condition, and the first and second runs back from a spell, known as first up and second up.

The trap is the sample size. A 2:2-0-0 at the track is two runs, and two runs prove very little. Our own work on going preference points the same way: a horse's own record on soft or heavy ground is mostly noise, and the sire's record is a better guide, although even that is a small effect. Tracks rated Heavy really do ride slow in our data, while a Soft rating is weaker evidence of how the track will play. The detail is in the mudlark myth.

Spells, trials and first-up runs

Australian horses race in preparations: a spell in the paddock, one or more barrier trials, then a run of starts before the next spell. That makes first up, the first run back from a spell, and second up, the run after it, a real part of the form.

Two things from our layoff research are worth carrying to the card. The comeback run tells you more about a horse's next start than an ordinary run does, so do not throw it away as "only a prep". And long-priced horses returning from a break are a fade in Australia, Britain and Ireland alike, while short-priced horses coming back from a short rest hold up well. See what a layoff really does to racehorse form.

What the numbers say about Australian racing

A routine for an Australian race

  1. Check the track rating and the rail, and check them again before the race.
  2. Read the class: maiden, class race, benchmark or Group and Listed. In a benchmark race, read the ratings and the weights together.
  3. Look for the runners whose recent ratings already reach the level the race needs.
  4. Read the stat lines for the track condition and the first and second runs back, and note the sample sizes.
  5. Count the front-runners and look at their barriers.
  6. Note the claims, the gear changes and the days since the last run.
  7. Decide what each contender is worth before you look at the market.

Every flat meeting in Australia is covered on MWP, metropolitan, provincial and country, on the same rating scale as Britain and Hong Kong, with the weights in kilos and the claim and the rail on the card. Hover any rating to read it as a benchmark rating. See the Australian form guide, open the free Flemington sample from Victoria Derby Day 2026, or learn the speed-first method in our free course, Do Your Homework.

Related: Australian racing form: betting the sprint capital · Horse racing abbreviations and form symbols · Pace handicapping · Draw bias and ground loss · How often do favourites win · What a layoff really does to form · Comparing form across countries · Australian form guide